Nissan Club Nederland
Leden => Stel je zelf voor! => Topic gestart door: Stevie-Boy op 12:08:12, woensdag 06 februari 2008
-
Hello everyone, my name is Steve and I am from the UK and one of the staff team over at http://www.npoc.co.uk. I shall use a translator also to make sure I can at least be semi understood!
Hello is iedereen, mijn naam Steve en ik ben van het UK en één over van het personeelsteam bij http://www.npoc.co.uk. Ik zal ook een vertaler om gebruiken ervoor te zorgen begrepen ik minstens semi kan zijn
I know a few of you guys from being over at NPOC O0 and wanted to come over and join up on your fantastic forums here.
Ik ken enkelen van u kerels van het zijn over bij NPOC O0 en gewild langskomen en omhoog op uw fantastische forums hier toetreden.
My car is a 1999 Nissan Primera GTLE Turbo Saloon, a few pics:
Mijn auto is een Turbozaal van Nissan Primera GTLE van 1999, een paar pics:
(http://www.npoc.co.uk/cotm/project%20GTT/gtt00176.jpg)
(http://www.npoc.co.uk/cotm/project%20GTT/gtt00218.jpg)
(http://www.npoc.co.uk/cotm/project%20GTT/gtt00222.jpg)
(http://www.npoc.co.uk/cotm/project%20GTT/img_2480.jpg)
Looking forward to a good browse of the forums :)
Het verheugen zich op een goed doorbladert van de forums
-
hi steve
lets keep it in english
the translation isnt that good, its more funny then usefull lol
welcome here!
-
English it is, cheers!!
-
It could be my computer but I can't see your pics.
Anyway, welcome at the Dutch Nissanclub.
-
Welcome off course and i also can't see your pictures. And what has been already said, let's keep it in English, I understand less of the Netherland that came out of the translation than i do understand of your English.
A P11 GTSE Turbo is always GOOD! Looking forward to see the pictures!
-
Welcome off course and i also can't see your pictures. And what has been already said, let's keep it in English, I understand less of the Netherland that came out of the translation than i do understand of your English.
A P11 GTLE Turbo is always GOOD! Looking forward to see the pictures!
Have a better look next time Rens :P
-
OMFG! I feel terrible about this big BIG HUGE mistake ;)
next time i will Rik tnx ;)
-
Cheers for the welcomes, our forum seems to be down at the moment which is why my hosted pics are not visible, damn!
-
Forum back up so pics now work :-)
-
looking good!
-
welcome at the dutch nissan club
-
Welcome, very nice ride!
-
welcome Steve, and a very nice GTLE.
have fun here
-
This is how she looks from the outside:
(http://www.npoc.co.uk/forum/uploads/20080125_185025_Cars1.jpg)
Can anyone tell me how to switch to full reply mode please?
-
I guess you mean the function you can get after you press the button "Bekijken"
or do you mean something else?
-
Ah yeah, that is the thing I was looking for, thank you O0
-
Hi Steve! Welcome here! Very nice ride!!
-
Ah yeah, that is the thing I was looking for, thank you O0
no prob
good luck on the other dutch thing over here
-
That's some hot shit what you have there O0
-
Nice Car and welcome here!! O0
-
Nice car and realy nice set up. But the hose that comes from the valvecover is that changed allready? the valvecover is getting boost now.
grtZ
-
Yeah cheers and good spot, things have been changed around a bit since that photo was taken ;-)
-
welcome here ;) nice car!!!!!
its about here somewhere.
you can also use the button "ANTWOORD" -----------------------------------------------------l
l
l
V
-
Nice one Barry, many thanks :-)
-
Welkom and nice car dude. 8)
-
Very nice car indeed. Do you have any figures and specs of it??
-
No figures yet, car is totally freshly built and not even had its final mapping yet, engine needs running in over the next couple of weeks also.
Specs though are:
SR20DE(T) 2045cc
Fully Rebuilt SR20DE
Pulsar Oil Squirters
8 Counter Weight Crank
Block Machined to over bore
Wiseco 87mm Forged Pistons
Eagle Rods
Cometic Head Gasket
APR Main Bolts, Head Bolts, Bearing Cap Bolts and Rod Cap Bolts
P10 Sump and Gridle
VE N1 Oil Pump Kit
Garrett GT28RS Turbo (Disco Potato)
Protech Ceramic Coated 3" Manifold
Protech Ceramic Coated 3" Downpipe
Protech Ceramic Coated 3" Turbo Elbow
Forge Intercooler
Various Stainless Pipe and Silicone Hosing
Stainless Steel Hose Clamps
Walbro 255 Fuel Pump
MSD 55lb/hr Injectors (570cc)
Piper Cams
Denso Iridium Spark Plugs
Lightweight Alloy Crank Pulley
ACT Organic Clutch
B&M Short Shifter
Oil Catch Tank
Fidanza Lightened Flywheel
Z32 MAF
Tomei Z32 MAF Harness
Apexi Air Filter
Greddy BOV
Magnecor KV85 Plug Leads
Adjustable FPR with Gauge
Apex Slimline Fan
Tunertoys Oil Distribution Block
Blitz Oil Temperature Adaptor
HKS Radiator Cap
Exide Maxxima 900 Deep Cycle Battery
Gauges and Electronics
Auto Gauge 52mm Oil Pressure Gauge
Auto Gauge 52mm Air Fuel Ratio Gauge
Auto Gauge 52mm Boost Gauge
Auto Gauge 52mm Oil Temperature Gauge
Greddy Profec B Spec II Electronic Boost Controller
Greddy Emanage Blue
Suspension
KYX AGX Shocks
Tein-S Springs
Custom Modifications
Heater Controls Relocated to behind Gearstick
Gauges 1-3 Mounted in Centre Console
Gauge 4 Mounted in Ashtray Lid
Greddy Profec Mounted in Centre Console
Battery Relocated to Boot
P11 GTT Private Registration Plate
It still has factory exhaust from catback which needs changing ASAP and I want to put new driveshafts onto it also :-)
-
That's a nice list you have there. I'm looking forward to the figures O0 ;)
-
that's a bombshell!!
Welcome on the NCN Forum Steve!
Grtz Lucas
-
Lucas, are you ex-NPOC?
-
Welcome to the club O0
Nice Ride ;D
-
I think I saw your car on G20.net too, a while ago ? Nice work, mate. How are engine temps with only 1 slim (pusher ?-)fan ? Looking forward to more pics and new data after fine-tuning.
-
Yup you did, hello! :-)
Temp should be fine, will see what it runs like at full power but I am hoping one fan will be sufficient with it.
Have read from others who have ran one fan for a long time with no issue.
Worst case scenario, another forty quid and some wires and slap another in ;-)
-
Welcome here,nice car you have!
Nice set up too.How many BHP you have?
Greetz Ronald
-
Nice car Steve, where are you located?
Turbo is the way a primera should be!
-
Freek en Freak...
Wat zal die Steve ervan denken...
-
Niet zeuren.
-
>:D
-
What lol?
Freek I am in the Lake District in England ;-)
-
Lucas, are you ex-NPOC?
i've been around there, mostly with my former car, a silver '97 GT saloon. I should take a peek there now and then!!
Grtz Lucas
-
Nice ride !
@ Freek, change your siggy..
-
Nice ride !
@ Freek, change your siggy..
Why change, it's sarcastic offcourse.
Steve, do you have the ACT NX9-HDSS ??
-
Welcome Steve!
-
welcome
-
Very nice saloon mate! Also welcome here! Enjoy our forum and see you this summer @ JAE?
Greetz! O0
-
Indeed you will, looking forward to meeting all you guys making it over to JAE, it's going to be awesome!
-
I certainly hope so. I never been to the UK before so I think driving on the 'wrong' side of the road is very strange.
-
Steve, do you have the ACT NX9-HDSS ??
?? :)